j 125 sailboat for sale

• J/Boats Home
• Brokerage Listings

"Can't Touch This" is one of the best equipped J/125's and has been continually upgraded.including new rudder, sails & silver LPU topsides. She has both a buoy race inventory and an offshore inventory. The boat has gone thru a long list of upgrades as well as a serious carbon diet. Carbon hand rails, hatch boards, carbon steps, carbon padeys with Spectra loops, a custom carbon step for offshore driving and Equiplight shackles throughout, . The boat has the new rudder design by Al Johnston along with all offshore safety gear. The boat is ready to go offshore today.

Make or Manufacturer

Displacement, fuel capacity, water capacity.

“ The J-125 is a boat of exceptional stability and power. Her handling is explained by an extraordinary stability index of 143 degrees, with a stability curve ratio of positive to negative areas of 12.5:1. This greater stability is combined with a balanced hull-form with proper amounts of reserve buoyancy forward. This provides safer and more controllable high-speed planing offshore in large waves as well as a wider steering groove upwind for sustained peak performance by average helmsmen. No IMS rule-inspired hull form can match the high 4.72 length-to-beam ratio of this seakindly yacht, nor the reserve buoyancy designed into her bow sections. High length-to-beam ratio ensures straight tracking in rough seas and light steering loads. Sailboats with fine bows and full midship sections are more difficult to balance and more likely to spin out of control in big waves. As user-friendly as it may be, this is a sailing machine designed to be the fastest, best-built boat of its type in the world. A long-lasting, high-tech carbon - Kevlar - E-glass - epoxy laminate is the answer. TPI Composites is the world leader with its patented SCRIMP process. This yields a laminate that's been tested by the US Naval Surface Warfare Lab at double the strength of hand lay-up construction. SCRIMP overcomes long term ownership concerns about delamination and structural failure because there are no air-pockets in the hull laminate and integral keel beam grid. Secondly, the ratio of glass fiber to resin is 2:1 rather than 1:2, resulting in a strength-to-weight ratio that exceeds custom race-boat, pre-preg construction. ”

Standard Equipment List Hull & deck built with TPI's patented SCRIMP vacuum resin infusion molding process. Hull has carbon fiber biaxial - unidirectional inner skin, biaxial Kevlar - E-glass hybrid outer skin and thermo-formed CoreCell linear structural foam core drilled for Pro-Set, or equivalent, epoxy resin.

Deck has carbon - E glass - CoreCell - vinylester laminate with gelcoat finish. Hull & deck laminates meet ABS offshore yacht standards to be CE Mark Certified for Europe.

E-glass - epoxy keel floors, mast step and longitudinal girder structural matrix molded using SCRIMP process and bonded and tabbed to hull with epoxy. o Five composite transverse bulkheads at forepeak, forward head, main bulkhead, aft settee, and aft berth area built with molded E-glass - foam core & reinforced w- unidirectional carbon. o Longitudinal hull stringers from forepeak bulkhead to main bulkhead P&S; from forepeak bulkhead to structural grid P&S. Two foredeck stringers from forward end of coach roof to forepeak bulkhead. Local reinforcements in way of high load areas. o Centerline stringer from structural grid to forepeak bulkhead incorporating mast step. o Dual longitudinal cockpit support bulkheads from transom to aft bulkheads.

Hull - Structure - Bulkheads are assembled, tabbed, painted and oven post-cured together at a peak 140 degrees during a total 25 hour curing cycle. o Molded seahood with integral instrument pod curved acrylic slider and drop board sliding in extruded PVC rails and equipped with inside - outside stainless hasp and combination lock. o Two continuous ORC height toe-rails integrally molded with deck forward of mast.

Removable 8.0' draft keel with high aspect nickel - aluminum - bronze alloy strut and lead bulb. Wide flange bolted into hull recess through solid carbon - E-glass backbone using ten 7-8" 316 grade stainless bolts.

Awlgrip topside and boot stripe in 2016.

Yanmar Diesel 3GM3OC x SD20 Saildrive. o Bri-Ski 16 x 11 folding propeller. o Recessed cockpit mounted engine panel with Spinlock single lever throttle-shift control. o Engine housed in composite box in two sections with air intake vent at aft end and sound insulated interior surfaces. o Wet type engine exhaust system with GRP stern tube and waterlock muffler. o Single cartridge Racor fuel filter with shut-off valve at tank and fuel gauge in cockpit.

Engine serviced April 2017

Molded steering pedestal with binnacle cover, Ritchie SP-5 compass, Edson ultra-light racing components, 58" Edson "Diamond" series aluminum wheel with black foam grip. o Aluminum emergency tiller with deck plate access. o Carbon fiber reinforced composite rudder blade & shaft mounted in Harken composite rudder bearings.

20 gallon aluminum fuel tank located aft of engine box vented through transom with cockpit sole deck fill. 22 gallon fresh water capacity in bladder tank mounted under port settee bunk with deck fill and vent to galley sink.

Bass DC electrical distribution panel w- 10 circuit breakers o Halogen swivel lights over berths above nav. station and galley. o Fluorescent lighting in head. Running & steaming lights. o Cockpit operated Henderson manual bilge pump. o Standard Rule 1100 electric bilge pump with manual override switch mounted in nav station. o Chainplate, keel, engine, pulpits, lightning ground & bonding system. o Two 8G27 gelcel batteries under companionway ladder with Guest 3 function battery switch. o Whale manual fresh water foot pump in galley with spigot at sink. o Flush seacocks below waterline including head intake, head discharge, galley sink, engine intake o Through-hulls include bowsprit-housing drain, engine exhaust on transom, bilge pump exhaust on transom, wheel well drain. o Solid laminate recess for electronics transducers with interior cover.

Carbon mast with 2 spreaders, custom engineered by Hall Spars and built with epoxy pre-preg carbon & autoclave curing to 80 psi at 250 degrees F. with new custom luff extrusion accepting either Antal sliding cars or boltrope, molded carbon gooseneck & vang attachment points. o Mast Collar: SparTite mast chock system shipped loose. o Mast Step: G10 epoxy custom fit mast step attaches to molded centerline longitudinal hull stringer with four SS bolts tapped to aluminum plate integrally molded in stringer. o Hall Spars aluminum boom (black Awlgrip finish) with vang attachment, clew outhaul sheave, webbing strap for mainsheet block attachment, reef sheaves at gooseneck. o Retractable 8.5' carbon J- sprit by Advanced Composites. Harken tackle system with control line led aft to cockpit. o Bowsprit bearing system with drain mounted in hull housing and exterior neoprene seal. Standing & Running Rigging o Standing Rigging: Continuous Nitronic 50 rod built by Hall Rigging. o Hydraulic Backstay Adjuster: Sailtech -12 long throw (14") hydraulic cylinder with remote panel mounted on forward side of pedestal. o Hall "Air" Vang with integral tackle system. o Chainplates: custom stainless chainplates and fasteners for shrouds, stemhead and backstay with plate doublers at shroud pins.

Sail Inventory Inshore Racing Inventory

North Mainsail-1 3Di

North Mainsail-2 3Di Raw 2015

North #1 Genoa 2012 3Di

North #2 Genoa 2012 3Di

North #2 Genoa 2015 3Di Raw

North #3 Jib, 2013 3Di Good Condition

North Jib Top Tri Radial Good Condition

North A-1 2013 Spinnaker Like New

North A-2 2013 Spinnaker Good Condition

North A-2.5 2016 Spinnaker Good Condition

North A-2.5 2017 Spinnaker Like New

Offshore racing inventory

Quantum Mainsail-1 with 1 reef Fair Condition 2010

Quantum Mainsail-2 2014 1 reef for offshore Like New - Hoisted 5 times

Quantum 150 MED/Heavy Genoa 2014 Good Condition

Quantum #3 Jib 2014 Hoisted once

Quantum #4 Jib 2014 New - never used

Quantum Genoa Stsl 2012 Good condition

Quantum Big Spinnaker Staysail New 2014 - almost no use

Quantum Small Spinnaker Staysail 2012 Fair Condition

Quantum A-2 Spinnaker 2012 Good Condition

Quantum A-2.5 Spinnaker 2012 Good condition

Quantum A 3 Spinnaker 2012 Very light use

Quantum A-5 Spinnaker 2012 Good condition

Quantum Mast Head Genoa 2017 that flies off the sprit

Modifications Can't Touch This has undergone rigorous modifications including:

Deck fittings upgraded to carbon Replaced padeyes with soft loop dynema Removal of all excess deck hardware PBO backstay Interior wood replaced with foam cored carbon SS hand rails replaced with carbon 2 Pipe berths replaced with carbon frames New custom high aspect carbon rudder Powder coated stanchions Bottom long boarded & faired Custom Grab bar installed by the pedestal New Head foil Self Retracting Bob stay MOB button at the helm New Rudder Bearings Aluminum goose neck and sheave box fittings at the ends of the boom replaced with custom carbon fabrication. New Raptor Deck in the cockpit Offshsore gear 6 man life raft

All offshore safety gear

Electronics All New electronics

H5000 with 6 displays

Zeus 2 chart-plotter

2 new Lithium house batteries to replace the AGM's.

Recent Upgrades 1) New head foil.

2) Custom carbon grab bar on the pedestal.

3) Cockpit repainted.

4) New Raptor deck in cockpit.

5) Original aluminum fittings on both ends of the carbon boom replaced with custom carbon fittings.

6) Boom kicker replaced with racing boom vang configuration.

7) Check stays replaced.

8) Custom bob stay installed on the sprit.

9) New hatch cover, wheel cover and sheet tail bags in cockpit.

10) Replaced stern hatch cover.

11) New B&G Hydra 5000 electronics and displays.

12) Rebuilt masthead wind instrument and replaced cable.

13) New carbon nav station panel, new chart plotter, new vhf and vhf antenna cable.

14) Replaced both rudder bearings.

15) Replaced batteries with Lithium batteries, new alternator and regulator, serpentine belts, battery monitor and battery switches.

Follow This Boat

J BOATS J/125

Sales information

• De Valk Antibes France
• +33 492 91 0202
• Call the broker

e-mail the broker

Tell a friend.

• download brochure

Take time onboard with a live video tour

Seen a boat that piques your interest but can't make a visit in person? One of our brokers will be your eyes and ears as they take you on a video tour with their phone. You can also ask them questions about anything that isn't visually obvious. Make the call and be welcomed aboard...

Download brochure

Broker's comments.

The 41 foot J/125 is as close to high performance big-boat sailing one can find in a boat that’s manageable (yes, even with spinnaker) by two or three people. Joy in ownership (and investment) is a function of time spent sailing. Time sailing depends on how easy it is to be off 'on the spur of the moment' inspired by a beautiful day without having to organize 8-10 crew. PHRF/Sportboat of the year 1999.

General - J BOATS J/125

Hull and deck built with TPI's patented SCRIMP vacuum resin infusion molding process. Hull has carbon fiber inner skin, Kevlar/E-glass outer skin and Pro-Set epoxy. Built 1998, delivered 1999. Dim. 12.5 (11.28) x 3.23 x 2.29 m. Displacement: 3,7 t. Ballast: 2.1 t. UpwindSA/DSPL: 43. DSPL/L: 74. Headroom: 1.80 m. 4 berths. Yanmar 28 hp engine.

Accommodation

4 berths. Marine head. Galley includes a two-burner alcohol stove, a small sink, and a plastic ice chest. The interior arrangement features sail lockers or optional adjustable pipe berths forward, followed by a head and hanging locker opposite. The galley is along the port main bulkhead across from a decent-size navigation desk, with room for repeaters above. Navigation desk is molded to fix the Panasonic Portable waterproof PC. The settees in the saloon serve as good sea berths. Most molded surfaces are finished with gelcoat. The headliner is a foam backed liner. Two quarter pipe berths are aft, with terrific access to the Yanmar Saildrive located between them. There are wellplaced stainless steel handrails that run from the main bulkhead aft to the companionway.

Yanmar 28 hp engine. Folding propelller. Wet type engine exhaust system. Racor fuel filter. Aluminium emergency tiller. Fuel capacity: 75 l. Water: 83 l.

B&G navigation instruments (new 2004): wind/inclination/log with doutside 4 20/20 displays + 1 20/20 master control, all talking with PC Sailmath racing program. Raymarine autopilot. GPS.

Custom lightweight stainless bow pulpit with combination nav light below rail on centerline.

Hall Spars carbon mast with 2 spreaders. Mast step. Hall Spars carbon boom. Retractable carbon J/sprit. Harken tackle system. Bowsprit bearing system. Standing rigging: Continuous Nitronic 50 rod built by Hall Rigging. Hydraulic backstay adjuster. New kevlar backstay (2005). 2 original kevlar runners (not used under IMS races). Hall "Air" Vang with integral tackle system. Running rigging: Hall Rigging to include 2/1 main halyard, 2 genoa halyards, 2 tapered spinnaker halyards, 2 genoa sheets, 2 tapered spinnaker sheets, mainsheet, cunningham, reef, spinnaker tack line, 2 traveler controls, spinnaker tack retrieval line and pole launching line, 2 checkstays. Headstay system. Original Harken furling genoa not used. Ullman mainsail. 2 sets North Kevlar: 1 set 3DL and 1 gennaker 2003 good condition, 1 set 3DL and 1 gennaker 2004 very good condition + new added Hall spars spinnaker pole +3 new spinnakers (2005). delivery main 2003 (as new) Deck hardware:2 new Harken 48 2 speed self tailing primaries (2004). 2 Lewmar 44AST 2 speed self tailing secondary for mainsheet winches. 2 Lewmar 48. 4 single Harken Speed Grip winche handle.

Buying a yacht in Russia

Would you like to buy a dream yacht? Will it be a motor or sailing ship? A luxury ocean yacht for sailing long distances or a small model adapted for fishing? The catalog of our company contains a large number of proposals for the sale of yachts in Russia and other countries. We also offer our services in the purchase of yachts in various technical conditions. Thanks to a wide selection of offers, both beginners in yachting and experienced professionals can take advantage of our services - an impressive assortment of vessels successfully combines with a wide range of prices.

You can choose a suitable vessel and buy a yacht in Russia using the capabilities of our company - experienced brokers are employed in 2yachts, ready to confidently and safely guide you through the process of buying or selling a vessel.

Before putting each offer to public access, we carefully check the legal cleanliness of the vessel and study the history of its operation. The managers of the company engaged in this market for a long time and possessing practical knowledge on the operation of yachts in different regions can help you with its purchase and sale.

You can choose a yacht for purchase in Russia , and we will draw up a formal contract, ensure the legal purity of the transaction and consultations on any aspects of owning a ship. At the same time, the confidentiality of your personal information is guaranteed.

If you are looking for a sailing yacht with high driving performance or a motor yacht with excellent controllability, then contacted us at. 2yachts company is a service for selecting the best trading offers from popular world yacht manufacturers. With us you can pick up a yacht that is a combination of unsurpassed quality, functional and efficient equipment and innovative solutions - a vessel that brings maximum pleasure from boat trips.

You can buy a yacht in Sochi or in St. Petersburg in order to be able to get an unforgettable experience of being on the water alone, with a group of friends or surrounded by family members. A walk on a sea yacht is an ideal way to get away from the bustle of the city with its eternal traffic jams and unplanned phone calls to enjoy beaches with azure waters, as well as romantic views and picturesque sunsets. Sea yachts are designed for long-distance travel and have great power, they are also distinguished by good maneuverability and dynamism. We will help you realize your dream, if you feel a craving for adventure and newness - we will choose a yacht with the best value for money.

Factors Affecting Cost

Buying a yacht in Russia is a rather time-consuming and lengthy process that requires the participation of professional yacht brokers. Depending on the condition of the vessel, the year of manufacture, the quality of its equipment, class and size, the acquisition cost can vary greatly. There are several indicators on which the cost of buying a yacht will depend :

• Manufacturer, or shipyard - the most famous manufacturers with expensive products are concentrated mainly in European countries, and the most budget yachts are assembled in shipyards of the countries of Asia and the Middle East;
• Equipment - sometimes the internal filling is made to order, and in some cases it is standard equipment with less power, comfort, speed, etc. In this regard, the cost of ships even from one manufacturer can vary greatly;
• Ship design;
• The age of the yacht.

Also, sailing yachts for sale in Russia cost the buyer less than similar motor lengths, but yachts with a history do not always cost less than recently launched ones. Often, the previous owners are engaged in the modernization of the vessel, installing expensive additional equipment on it or customizing the yacht - in this case, the price for it increases significantly. And sailing yachts often participate in regattas, where they can take prizes and eventually acquire a name - this also leads to a rise in the cost of the vessel.

Note that the cost of a yacht in Russia will be significantly different depending on the length of the vessel. You can always check the final cost of the vessel with a yacht broker, and since this market is very lively, the price can change even during the time during which you pick up a yacht.

You can find out the price of the selected vessel and its technical parameters in our catalog, and you can leave a request for purchase directly on the website, online. To choose a yacht for purchase , you can use the help of our broker for the sale of yachts - our specialists are in collaboration with their colleagues around the world to be able to cover the entire market. Ask our manager your questions to get detailed information on the yacht you are interested in.

We wish you success in conducting transactions on the yacht market!

181 marinas

• Advertising

• Netherlands
• United States
• United Kingdom